EasyPIC PRO v7 Development System
WHAT IS EASYPIC PRO™ V7 DEVELOPMENT SYSTEM
EasyPIC PRO™ v7 is a full-featured development board for high pin-count 8-bit PIC® microntrollers. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, Temperature measurement and other. On-board mikroProg™ programmer and debugger supports over 155 PIC® microcontrollers. Board is delivered with MCU socket containing PIC18F87K22 microntroller.
MODULES
Ethernet On-Board
Ethernet connector (RJ-45) allows you to develop ethernet applications.
UART
Write UART applications for laptops too. Besides RS-232, we also added USB-UART.
Output
We added additional screw terminals with output 5V and 3.3V power supply.
GND
We added three additional GND pins for easier access of your oscilloscope probes.
Display Socket
Special plastic GLCD and LCD holders make sure that your displays securely fit in place.
Power
Dual switching power supply allows the board to support boath 3.3V and 5V devices.
MIKROBUS™ SOCKETS
With three mikroBUS™ sockets you can add dozens of new functionality to your board with minimum hardware adjustments. Collection of mikroBUS™ compatible Click Boards is growing rapidly, and we have designed them with great care, so you don’t have to make any complicated settings. Just plug your board in, and you are good to go.
MCU CARD
Standard 80-pin MCU card with PIC18F87K22 is included in the package with the board. It’s also sold separately, if you’d like a spare one to integrate into your own hardware or for any other reason.
| Type | 7th Generation |
| Architecture | PIC (8-bit) |
| Programming | USB |
| Silicon Vendor | Microchip |
| MCU Socket | MCU card 7th gen |
| mikroBUS No. | 3 |
| Supply Voltage | USB,External |
| Category | 7th Generation |